DEVELOPMENT OF A MATHEMATICAL MODEL OF THE "SHROEDER-TRANSPORTER" SYSTEM IN THE TECHNOLOGY OF PROCESSING CABLE WASTE
DOI:
https://doi.org/10.52167/2790-5829-2022-2-2-26-34Keywords:
shredder, crusher, granulator, tape, optimization, cable production waste, conveyor, electromechanical system, tape, dynamic load, mathematical model, simulation parameters, cargo flowAbstract
The article deals with the development of a mathematical model of the "Schroeder - Transporter" system, which is the main part of the technological process of processing waste cable and wire products. The task of increasing the efficiency of the cable waste recycling process is solved by optimizing the operation of all electromechanical systems: crushers, shredders, granulators and their connecting elements - conveyors. The very process of moving crushed cable production waste has an unstable nature of the load of the moving web, and the reduction of dynamic loads during the start-up of the electromechanical system of the conveyor, the transfer of cargo from one crushing equipment to another is very important. The solution is to control the operating modes of the conveyor by the speed parameters of the tape movement and the change in dynamic loads in case of uneven loading and movement of the flow of the crushed cable mass. The mathematical model of the electromechanical system "Conveyor - shredder" is based on the study of the movement of the tape, which will take into account the uneven traffic, as well as the presence of large and unstable dynamic effects. The choice of modeling parameters is also determined by the flow of processes in the conveyor belt with variable loads and will ensure that the elastic-viscous properties of the entire system are taken into account when the load is transferred along the conveyor in compliance with the speed parameters that are optimal for the operation of the entire waste processing line.
References
Classification of conveyors. https://www.3bhungaria.com.ua/new/178-klassifikatsiya-konvejerov-osnovnye-tipy-konvejerov-napravleniya-razvitiya-konvejerov
Kazovsky E.Ya. Transients in alternating current electric machines [Text] / Kazovsky E.Ya. - М.-L.: Publishing House of the USSR Academy of Sciences, 1962. – p. 625.
Cheryomushkina M.S., Synthesis of algorithms for controlling a multi-motor electric drive of conveyor transport with the use of semiconductor converters [Text]: Dissertation ….. Candidate of Technical Sciences/ Cheryomushkina M.S. St. Petersburg, 2009.
Bilichenko N.Ya., Operating modes of belt conveyors [Text] / Bilichenko N.Ya.- Kyiv: State Publishing House of Technical Literature 1964.- p. 261.
Dmitrieva V.V., Development and research of the system of automatic stabilization of the linear load of the main conveyor [Text]: Dissertation … Candidate of Technical Sciences / Dmitrieva V.V. – М., 2005.
Tsypkina Victoria Vyacheslavovna, Ivanova Vera Pavlovna, Isamukhamedov Dilshod Nigmatullaevich, Atamukhamedova Rano Faziljanovna, Zaitov Yorkinjon Gairatjon Ugli. Analysis of methods of crushing cable production waste on industrial shredders // Universum: Technical Sciences. 2021. No.11-5 (92). URL: https://cyberleninka.ru/article/n/analiz-sposobov-drobleniya-othodov-kabelnogo-proizvodstva-na-promyshlennyh-shrederah (Date of application: 17.04.2022). DOI - 10.32743/UniTech.2021.92.11.12618
Tsypkina Victoria Vyacheslavovna, Ivanova Vera Pavlovna, Isamukhamedov Dilshod Nigmatullaevich, Ortikova Musallam Jahongir Qizi, Atamukhamedova Rano Faziljanovna. Efficiency issues of the production process of conductive cores based on composite materials for cable and wire products // Universum: Technical Sciences. 2021. No.5-5 (86). URL: https://cyberleninka.ru/article/n/voprosy-effektivnosti-protsessa-proizvodstva-tokoprovodyaschih-zhil-na-osnove-kompozitsionnyh-materialov-dlya-kabelno-provodnikovoy (Date of application: 17.04.2022). DOI - 10.32743/UniTech.2021.86.5.11826
V.P. Ivanova, V.V. Tsypkina, Improving the reliability of power supply to active consumers by improving the technology for manufacturing cable product, Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020), ISSN: 2267-1242, E3S Web of Conferences 216, 01152 (2020) RSES 2020, Volume 216 (2020) https://doi.org/10.1051/e3sconf/202021601152
V.P. Ivanova, V.V. Tsypkina, D.B. Madrakhimov Improving the reliability of cable lines operation in hot climates, Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020), ISSN: 2267-1242, E3S Web of Conferences 216, 01151 (2020) RSES 2020, Volume 216 (2020) https://doi.org/10.1051/e3sconf/202021601151
Tsypkina Victoria Vyacheslavovna, Ivanova Vera Pavlovna, Isamukhamedov Dilshod Nigmatullaevich, Juraeva Gulmira Makhamatiminovna, Juraeva Akhdiya Kayumjon Qizi. Study of the issue of the working capacity of the crushing equipment conveyor. // Universum: Technical Sciences. 2021. №11-5 (92). URL: https://cyberleninka.ru/article/n/izuchenie-voprosa-rabotosposobnosti-transportera-drobilnogo-oborudovaniya (Date of application: 17.04.2022). DOI - 10.32743/UniTech.2021.92.11.12620
V. Tsypkina, D. Madrakhimov, Method of resource saving of cable production recycables E3S Web Conf. Volume 139, 2019 Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2019) https://doi.org/10.1051/e3sconf/201913901058
Ivanova Vera Pavlovna, Tsypkina Victoria Vyacheslavovna, Turabekov Oybek Ulugbekovich, Ortikova Musallam Jahongir Qizi, Nazrullaev Sirojiddin Foziliddin Ugli. Development of a mathematical description of a shredder for processing cable waste. // Universum: Technical Sciences. 2021. No.11-5 (92). URL: https://cyberleninka.ru/article/n/razrabotka-matematicheskogo-opisaniya-shredera-dlya.
